SaltLakeCityRecruiter
the smart solution for Salt Lake City jobs

Simulator Technician I

Company: FlightSafety International
Location: Salt Lake City
Posted on: May 19, 2019

Job Description:

Requisition 14499

Location: Salt Lake LC (0028) Salt Lake City , 84116 , United States (US)

BASIC FUNCTION:

Maintain and /or repair flight training devices (FTDs) in accordance with Regulatory Authority requirements and company standards by performing the following duties:

ESSENTIAL DUTIES AND RESPONSIBILITIES: THE FOLLOWING DUTIES ARE ESSENTIAL TO THE SUCCESSFUL AND SATISFACTORY PERFORMANCE OF THIS JOB. OTHER DUTIES MAY BE ASSIGNED.

FLIGHTSAFETY LEARNING CENTERS PROVIDE TRAINING AND SUPPORT TO CUSTOMER AND CLIENTS 24 HOURS A DAY, 7 DAYS A WEEK, 365 DAYS A YEAR. LEARNING CENTER TECHNICIANS MAY BE SCHEDULED AT VARYING TIMES AND DAYS TO SUPPORT THE CUSTOMER NEEDS.

APPRENTICE Entry level uses basic understanding of the field to perform job duties Works directly with more senior Teammates. Work is closely observed and reviewed.

TECH I Performs more varied and difficult aspects of the job; may need some guidance on job duties; applies learning to recommend options to address unusual situations

TECH II Successfully completes diverse tasks of the job; applies and enhances knowledge and skill in both usual and unusual issues; needs minimal guidance in addressing unusual situations.

TECH III Performs without assistance; recognized as a resource to others: able to translate complex issues to others; able to improve processes; focus on broad issues.

JOB DUTIES:

* Perform standard Simulator support activities such as: installation, operation, inspection, periodic maintenance (align & adjust), of Simulator components and systems

* Perform Customer configuration changes to Simulators and FTDs, evaluate and confirm proper post change operation. This includes hardware, software, and avionics database change-outs

* Able to quickly identify, troubleshoot, repair or replace most of the Simulator and FTD electrical and sub system components and most hydraulic system components with little to no assistance.

* Exercise judgment and independence in determining solutions to maintenance and repair problems, and otherwise carry assignments through to completion, and referring only the most unusual and difficult problems to the Lead/Sr Lead Technician or the A/MFTD.

* Monitor Simulator(s) performance and condition to ensure that equipment continues in compliance with governmental regulations; this is accomplished by making sure that changes are not made to the training software or hardware that would affect the handling characteristics of the simulator, in either air or ground modes in accordance with FlightSafety International policy and standards; also through continuing observation of maintenance and pre-flight log(s), and by assisting with and/or conducting simulator performance evaluations, as necessary.

* Able to accomplish scheduled portions of the Qualification Test Guide (QTG), check and mark test results as required, and participate in recertification procedures for the FAA.

* Exhibit an understanding of the SAP system and the inventory management process.

* Must be familiar with all governing regulations required by the various approval authorities for the proper operation of all FTDs, the facility, and the safe employment of personnel.

* Initiate or assist users (DOTs, PMs, instructors, clients, etc.) in the use of ePodium when ceating a Simulator Discrepancy Report (SDR) , as well as how to access all of the documentation on ePodium previously available only in the Simulator Logbook.

* Must be knowledgeable of all Simulator Support, Quality Operating Procedures (QOPs

* and related documentation.

* Participate in inter-shift briefings, reviewing the shift log, and shift pass downs; reviewing Simulator Logs, and maintaining email communication.

* Make recommendations to the Lead/Sr. Lead Technician or the A/MFTD concerning needed parts, acquisitions, or other material used for FTD repair and support, or other Center projects.

* Adhere to required work schedule including prompt and regular attendance.

* Report on a timely basis, any safety hazards observed in work area, equipment, and/or building to the appropriate person(s) for correction.

* Supports published Quality Management Systems (QMS) and Business Processes.

* Support Learning Center Management System (SMS) by adhering to the processes related to accomplishing SMS goals.

* Support FlightSafety International s, and its subsidiaries commitment to ethical behavior by basing our priorities on lawful and ethical conduct as we deal with co-workers, customers, vendors, and others in all of our operations. (See Sarbanes-Oxley Act of 2002)

* Occasionally travel for training purposes or to assist other Centers, as needed.

* Exhibit and practice professional and courteous behavior while interacting with both internal

* and external customers.

SUPERVISORY RESPONSIBILITIES:

None

QUALIFICATION REQUIREMENTS: (THE REQUIREMENTS LISTED BELOW ARE REPRESENTATIVE OF THE KNOWLEDGE, SKILL AND/OR ABILITY REQUIRED.)

EDUCATION AND/OR EXPERIENCE: (MINIMUM REQUIREMENTS)

APPRENTICE Associate's degree in electronics from college or completion of an electronics technical school preferred; or a combination of three (3) years education and experience, including:

* Electronics technology, avionics or related civilian/military technology; or

* Equivalent direct experience with simulators or other FTDs

TECH I - Associate's degree in electronics from a college or completion of a civilian/military electronics technical school preferred, plus two (2) years experience, including:

Electronics technology, avionics or related civilian/military technology; or equivalent direct experience with simulators or other FTDs

Must be able to:

* Read and interpret technical drawings

* Use test equipment, support equipment and tools used on flight simulators, graphical flight simulators (GFSs) and associated electronics devices

* Demonstrate a good understanding of the advanced operating principles of simulator and FTD subsystems.

* Education can be substituted by a combination of three (3) years education and experience in a related field.

TECH II - Associate's degree in electronics from a college or completion of a civilian/military electronics technical school preferred, plus four (4) years experience, including:

Electronics technology, avionics or related civilian/military technology; or equivalent direct experience with simulators or other FTDs

Must be able to:

* Read and interpret technical drawings

* Use test equipment, support equipment and tools used on flight simulators, graphical flight simulators (GFSs) and associated electronics devices

* Education can be substituted by a combination of three (3) years education and experience in a related field.

TECH III - Associate's degree in electronics from a college or completion of a civilian/military electronics technical school preferred, plus Seven (7) years experience, including:

Electronics technology, avionics or related civilian/military technology; or equivalent direct experience with simulators or other FTDs

Must be able to:

* Read and interpret technical drawings

* Use test equipment, support equipment and tools used on flight simulators, graphical flight simulators (GFSs) and associated electronics devices

* Education can be substituted by a combination of three (3) years education and experience in a related field.

SOFTWARE KNOWLEDGE AND SKILLS:

General knowledge of Microsoft word, excel, PowerPoint, and Outlook required. Familiarity with Microsoft Access preferred. Knowledge of other software programs may be required, as needed.

FlightSafety is an Equal Opportunity Employer/Vet/Disabled.

Keywords: FlightSafety International, Salt Lake City , Simulator Technician I, Professions , Salt Lake City, Utah

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other Professions Jobs


Intermodal CDL-A Company Driver - Top Tier Pay in the Industry [SLC]
Description: 888 423-6888 One of the Nation's Top Carriers, Hub Group Trucking, now has a variety of driving opportunities for CDL-A Company Drivers. As one of the largest intermodal/drayage
Company: Hub Group Trucking
Location: Sandy
Posted on: 05/24/2019

Inbound Travel Consultant
Description: Assisting Inbound Business Customers with their Corporate Travel Bookings. Must be professional and have previous international travel booking experience. We are the number one contact center and client (more...)
Company: Mommy Jobs Online
Location: Bountiful
Posted on: 05/24/2019

Reefer Driver - Excellent Benefits!
Description: Contractor - DriverWestern Flyer Xpress- REEFERMost carriers pay a higher CPM to reefer drivers because miles are generally not as high. Well,at WFX, you get the best of both worlds. Higher Pay and Strong (more...)
Company: Western Flyer Express
Location: Provo
Posted on: 05/24/2019


Shasmi Beauty Skin Care Consultants
Description: We are seeking professional beauty skin care sales consultants to consult with customers on skin care products. The annual income potential ranges from 40,000.00 150,000.00 per year. You
Company: Mommy Jobs Online
Location: Bountiful
Posted on: 05/24/2019

Staff Shuttle Driver - St. Regis Deer Valley - (19000Y9S)
Description: Here's To Your Journey with St. Regis The St. Regis brand first established luxury hospitality more than 110 years ago, with the opening of the St. Regis New York. From the moment John Jacob Astor IV (more...)
Company: Marriott International, Inc.
Location: Park City
Posted on: 05/24/2019

Class A CDL Dedicated .63 CPM. $80,900/Yr. Great Benefits! Join Today!
Description: Dedicated Lanes/Home Time/Better Pay br br Medical, Dental, Vision, 401K br br Late Model Equipment br br Sign on Bonuses 3,000 to 5,000 br br Operational Summary br br (more...)
Company: Blackhawk Transport
Location: Lehi
Posted on: 05/24/2019

OTR CDL-A Drivers Wanted! Weekly Home Time!
Description: Looking for Experienced OTR CDL-A Drivers to Join the Navajo Express Family Navajo Express has immediate openings for Regional, Dedicated and OTR positions throughout the US. Navajo Express also has immediate (more...)
Company: Navajo Express
Location: West Jordan
Posted on: 05/24/2019

US Production Scheduling Support - 1st Shift
Description: JOB DESCRIPTION br br DUTIES MAY INCLUDE: br br Assembles/processes product, parts and assemblies using hand tools, customized tooling, and/or semi-automated equipment. br br Follows written (more...)
Company: Varex lmaging
Location: Salt Lake City
Posted on: 05/24/2019

CDL-A Company Truck Drivers
Description: NEW, HISTORIC PAY RAISE Solo Drivers Can Earn Up to 55-- per MileTeam Drivers Can Earn Up to 58.5-- per Mile 5,000 Sign-On Bonus Limited
Company: Henderson Trucking
Location: Provo
Posted on: 05/24/2019

OTR CDL A Truck Driver - Earn Up to .55 CPM!
Description: Butler Transport is now hiring OTR CDL A Truck Drivers You've Got the Drive.-- We've Got the Direction --Drivers - are you looking for a place to call Home --Drive for the Best.--
Company: Butler Transport
Location: Orem
Posted on: 05/24/2019

Log In or Create An Account

Get the latest Utah jobs by following @recnetUT on Twitter!

Salt Lake City RSS job feeds